enEnglish

Pine Wood Coffin Boards

Pine Wood Coffin Boards
Product Introduction:
We stick to White Pine for the bulk of our runs. Why? Because it’s predictable. It’s easy on the tools, easy on the shipping budget, and most importantly, the grain doesn't fight you. It stays flat, which is exactly what you need for a professional finish.
Send Inquiry
Description
Technical Parameters

Cao County Huifengyuan Wooden Co., Ltd. is one of the leading manufacturers and suppliers of pine wood coffin boards in China. With a professional production team, we are able to meet the needs of the majority of our customers. We warmly welcome you to wholesale premium wooden coffins and coffin accessories from our factory. Customized orders are welcome.

 

Recommended Pine Types

   

top surface

We stick to White Pine for the bulk of our runs. Why? Because it's predictable. It's easy on the tools, easy on the shipping budget, and most importantly, the grain doesn't fight you. It stays flat, which is exactly what you need for a professional finish.

When weight is a selling point, Red Pine is the better call. It's tougher and gives the unit a more substantial 'heft.' We also use a lot of Korean Pine out of the North. It's got just the right amount of resin-enough to keep it stable during export but not so much that it ruins the machinery.

But I'll tell you what we don't touch: the high-resin Southern varieties. They are a disaster in the drying phase. You'll get uneven shrinkage every time, and that sap bleed is a nightmare under a light stain. It's a cheap way to ruin a reputation, so we just steer clear of it entirely.

 

pine boards

20240613151135

Dimensional Specifications

 

Standard Thickness: Lid/Top Panel: 38–50 mm (1.5–2 inches) to ensure rigidity and aesthetic appeal .
  25–38 mm (1–1.5 inches) to balance strength and weight
  38×50 mm (1.5×2 inches) for structural support
Length and Width: Interior Dimensions: Typically 1950–2050 mm (77–81 inches) in length, 530–580 mm (21–23 inches) in width at the head, tapering to 410–460 mm (16–18 inches) at the foot
  Exterior Dimensions: Add 50–75 mm (2–3 inches) to all sides for framing and finishing .

 

Moisture Content

Optimal Range 8–12% to prevent warping, cracking, or fungal growth.
Regional Adjustments In humid climates like Shandong, target the lower end (8–10%) to account for environmental moisture absorption .
Testing Use a moisture meter to verify compliance, with readings taken at multiple points on each board.

 

Durability and Treatment

 

Natural Resistance Heartwood from mature pines (≥80 years old) contains higher levels of natural resins, providing inherent resistance to decay.
Chemical Treatment For enhanced durability, boards may undergo ACQ (Alkaline Copper Quaternary) or copper azole treatment, ensuring a preservative retention of ≥6.4 kg/m³ and penetration depth ≥5 mm.
Avoidance CCA (Chromated Copper Arsenate) is prohibited due to environmental concerns.
Load-Bearing Capacity Boards must withstand ≥250 kg when assembled, with no visible deformation after 2.5 hours of continuous stress
Joint Strength Mortise-and-tenon or doweled joints are preferred over nails/screws to minimize weak points.

 

Surface Finish

Sanding Boards must be sanded to 120–220 grit for a smooth, splinter-free surface.
Priming Apply a water-based or oil-based primer to seal the wood and enhance paint adhesion.
Traditional Finish Two coats of gloss or satin polyurethane or linseed oil for a durable, moisture-resistant finish.
Eco-Friendly Options Unfinished natural pine or beeswax-treated surfaces are used for biodegradable coffins.
Paint Standards Adhere to GB 18581-2020 for low-VOC emissions, ensuring formaldehyde ≤0.1 mg/m³ and heavy metal content within safe limits.

 

Regional and Cultural Considerations

 

Shandong/Heze Practices:

Local manufacturers prioritize kiln-dried white pine with moisture content ≤12% to align with regional humidity levels .

Traditional designs in Heze may include carved motifs and a "half-couch" lid (split lid) for viewing the deceased .

International Compliance: For export, coffins must meet ISO 846 (fungus resistance) and ASTM D143 (bending strength ≥50 MPa) .

 

Contact Us

 

For more information about product customization, bulk pricing, or sample requests, please call us grace@hfywooden.com or visit our official website www.hfycoffin.com.​

 

image-20250916150448-1.png

 

Hot Tags: pine wood coffin boards, pine wood coffin boards manufacturers, suppliers, factory in China, abete wood board used for making coffins, Pine Wood Coffin Boards, Paulownia coffin board, Cherry Wood Coffin Boards, Poplar coffin planks, solid frassino wood panels

Send Inquiry
CAO COUNTY HUIFENGYUAN WOODEN CO., LTD
Wooden coffins, Wooden urns, Coffin accessories, Funeral products, Wooden panels, Wooden furniture etc.
contact us