Cao County Huifengyuan Wooden Co., Ltd. is one of the leading manufacturers and suppliers of three layer finger joint board composite for door frame in China. With a professional production team, we are able to meet the needs of the majority of our customers. We warmly welcome you to wholesale premium wooden coffins and coffin accessories from our factory. Customized orders are welcome.
Product Description
The three-layer finger-joint board composite for door frames is a specialized engineered wood material designed for manufacturing door frames. It integrates the structural advantages of finger-joint technology and multi-layer composite design, addressing the limitations of solid wood (such as easy warping, cracking, and high material waste) while meeting the mechanical performance and durability requirements of door frames. Below is a detailed breakdown of its core components, structural characteristics, manufacturing process, performance advantages, application scenarios, and comparative advantages:
Core Definition & Structural Composition
This composite material consists of three functional layers bonded together, with each layer processed via "finger-joint" technology (a woodworking method that joins short wood strips end-to-end using interlocking "finger-like" grooves, maximizing wood utilization). The three layers are typically structured as follows (from top to bottom, or front to back):
Key Manufacturing Process
The production of this composite material follows strict engineering standards to ensure consistency and performance. The main steps are:
Wood Material Preparation
Select raw wood (usually fast-growing softwoods or recycled wood strips to reduce costs and environmental impact).
Cut wood into short strips (length: 30–80cm, depending on finger-joint design) and dry them to a moisture content of 8–12% (critical for preventing post-installation warping, as door frames are often used in indoor environments with stable humidity).
Finger-Joint Processing
Machine the ends of each wood strip into interlocking "finger" grooves (precision: ±0.1mm to ensure tight bonding).
Apply environmentally friendly structural adhesive (e.g., E0/E1 grade urea-formaldehyde resin or polyurethane adhesive, meeting indoor air quality standards) to the grooves.
Press and cure the strips end-to-end to form long, continuous wood panels (called "finger-joint lumber") for each layer.
Multi-Layer Composite Bonding
Arrange the three layers with cross-grain direction (e.g., surface layer grain parallel to the door frame length, core layer grain perpendicular). This "cross-lamination" design neutralizes wood shrinkage/expansion stress, eliminating warping.
Use a hot press (temperature: 120–150°C, pressure: 8–12MPa, time: 20–30min) to bond the three layers into a single composite board.
Post-Processing
Trim the composite board to standard door frame sizes (e.g., width: 8–12cm, thickness: 3–5cm, length: 2.1–2.4m).
Sand the surface to a smooth finish (Ra ≤ 6μm) for subsequent painting, veneering, or PVC lamination.
Contact Us
Call us today at +86-13395403000 or visit www.hfycoffin.com to learn more.
Hot Tags: three layer finger joint board composite for door frame, three layer finger joint board composite for door frame manufacturers, suppliers, factory in China, Oak door frame panels, Three Layer Density Board Composite for Door Frame, finger joint solid wood board for door frame, solid Eucalyptus wood board, Eucalyptus Wooden Door Frame Boards, Three Layer Finger Joint Board Composite for Door Frame
