enEnglish

Finger Joint Wood Board Quality Requirements & Inspection Methods

Dec 02, 2025

Leave a message

1. Material Requirements

Base material: 100% solid pine wood, no composite/engineered substitutes;

moisture content 8–12% (meets industry humidity standards).

No decay, insect infestation, or dead knots exceeding 5mm; live knots ≤15mm, spaced ≥100mm apart.

2. Finger Joint Quality

Joint structure: Interlocking finger profile with tight fit (gap ≤0.2mm);

adhesive: waterproof wood glue (meets EN 204 D3 standard).

Shear strength: ≥2.5N/mm² (tested via tensile shear test on random samples).

3. Dimensional & Flatness Tolerance

Thickness/width/length: ±0.5mm per meter (calibrated with digital caliper).

Flatness: ≤0.3mm/m (checked with straightedge and feeler gauge).

4. Appearance

Surface: Smooth, no splinters, cracks, or glue residue;

sanded to P240 or P180 grit (visual & tactile inspection).

Color: Uniform pine tone, no obvious discoloration or stains.

5. Inspection Methods

Sampling: 3% of each batch (min. 5 boards); full inspection for at least 80% batches (Nearly each units should be inspected).

Tools: Digital caliper, moisture meter, straightedge, feeler gauge, tensile tester.

Rejection: Any board failing 2+ criteria; re-inspect entire batch if 10%+ samples fail.

                                                                                         

                                                                                           By Grace Xu from Cao County Huifengyuan Wooden Co., Ltd.

                                                                                                                        

ScreenShot2025-12-02162411495

ScreenShot2025-12-02162544893

ScreenShot2025-12-02162617231

ScreenShot2025-12-02162719664

ScreenShot2025-12-02162749216

Send Inquiry
CAO COUNTY HUIFENGYUAN WOODEN CO., LTD
Wooden coffins, Wooden urns, Coffin accessories, Funeral products, Wooden panels, Wooden furniture etc.
contact us